午夜不卡久久精品无码免费,无码国产精品一区二区免费式直播,老妇出水BBW高潮,18黑白丝水手服自慰喷水网站

高壓交聯聚乙烯絕緣電力電纜

型號:

電纜導體的最高額定溫度為90℃,短路時(最長持續時間不超過5S),電纜導體的最高溫度不超過250℃。

關鍵詞:

高壓交聯聚乙烯絕緣電力電纜

所屬分類:

產品描述

  高壓交聯聚乙烯絕緣電力電纜

  HIGH-VOLTAGE XLPE INSULATED POWER CABLE

  執行標準

  IMPLEMENTED STANDARD

  額定電壓35kV及以下銅芯、鋁芯交聯聚乙烯絕緣電力電纜GB/T12706.2-2002,GB/T12706.3-2002,IEC60502-1997

  Rated voltage 35kVand below XLPE insulated,Cu/Al corepower cable GB/T12706.2-2002,GB/T12706.3-2002,IEC60502-1997

  產品用途

  APPLICATION

  本產品適用于額定電壓3~35kV的高壓電力線路輸配電能。

  The product applies to transmission and distributionof highvoltage power lines at rated voltage3-35kV

  使用特性

  SERVICE CHARACTERISTICS

  電纜導體的最高額定溫度為90℃,短路時(最長持續時間不超過5S),電纜導體的最高溫度不超過250℃。

  敷設電纜時的環境溫度應不低于0℃,低于0℃時應先預熱。

  敷設電纜時允許彎曲半徑:單芯電纜不小于電纜外徑20倍;多芯電纜不小于電纜外徑的15倍。

  Rate voltage max is 90℃.at short circuit (duration max ≤5S) ,temperature max is not higher than 250℃.

  The temperature of laying should not be lower than 0℃ , pre-heating is needed if the ambient temp.of laying is lower thano℃.

  The bend radius for laying: the one of single core cable shouldnot be shorter than twenty times of outer diam; the one of mu-lti core should not be shorter than fifteen times of outer diam.

111111111111111111111111111111111111111111

歡迎您的留言咨詢

我們的工作人員將會在24小時之內(工作日)聯系您,如果需要其他服務,歡迎撥打服務熱線:0514-84239996